2003 Chevrolet Silverado 1500 "need car help break lights" Questions

...HELP!!!! Depending what amperage fuse was blown, ( agreeing with jtarin if you are dealing with the brake lights) Then you could have a possible short to Ground. Meaning that there is a break in the ...

...break in it. You need to be sure the valve is shifted to the center position again and this will usually happen when you bleed the fluid after fixing the line or you will need to replace the valve in ...

...need to pay for a scan of the ABS computer. check your brake fluid to see if its low ,if not does your pedal not feel as firm as it normally does? if not you may have a hydralic leak some where where ...

...help? Yes, you need to of course check the voltage coming into and going out of the brake light switch, if 12 Volts are there going out and coming in while pressing on the brake pedal, your brake ...

...need to replace the Passenger rear view mirror on a 2002 Chevy It is a Silverado 1500 and I do not know how to remove the interior plastic panel without breaking it. How do I remove the interior ...

...need to know how to replace the rear brake drums. First block the tires on the front of the car, front and rear of the tire. place the transmission in park, do not set the parking brake. Jack up the ...

...break them. to remove the outter panel open door- obvously- remove the outter door handle and mirror. remove the seal on top of the panel (black, protects window) you will need a flat screw driver, ...

help but generally that will result in low power not complete loss. CHANGE BATTERY,AND WIRE ,THIS IS ALL YOU SHOULD NEED! If you have a bad battery,and the battery has a short in it,it is possible the

...company. I'm sure they'd be able to help you. You wouldn't want to break it by trying to figure it out by yourself. ...

...the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace hope this helps you out have a good ...