airbag light came on, i have not been in an accident nor is there any visible problem with the airbag. is there a way i can reset this instead of paying a mechanic? the airbag system does a self check
Airbag light goes on and stays on, where is the fuse for the airbags in a 2000 chevy suburban? doubt very seriously that it is a fuse problem.....does the horn blow steady as you turn the wheel.... ...
Question about Chevrolet Suburban
...airbag light means that the vehicle's computer has detected a likelihood that the airbag will NOT deploy in an accident as designed. This means there is virtually no chance it will inflate for no ...
Question about Chevrolet Suburban
...airbag light is on,clock desnot wrk Well, the good news is that you have narrowed down and almost pinpointed your problem. follow your airbag wiring from the sensors in the front and work backwards. ...
Question about Chevrolet Suburban
...airbag light comes on and stays solid does not blink i have change the sensors in the front bumper and the module looks fine under the driver seat the wires look good to check ECU and control module ...
...light of the airbag is on and it says it need service airbag You need to have a dealer check this with their scan tool,It is a sensor that is defective,it may be one of the impact sensors,So you'll ...
...light on so the testing is very important to avoid replacing good parts and still not repair the problem. The most common fault is a leaking airbag at one or more wheels suspension. The life span of ...
...light will go out. if you have to get a airbag get the computer with it and replace both at the same time. the airbag is simple always pull the fuse before working on abs remove the four bolts under ...
...airbag light came on in our 2005 chevy suburban 1500 Hello and welcome. this light comes on to warn you that there is a problem with the air bag system. when this light comes on, the air bag control ...
...do I reset the service airbag indicator The air bag light comes on when there is a problem registered in the system. You can not just reset it, you have to figure out what the problem is and fix
464 questions posted
Usually answered in minutes!
550 Questions
469 Questions
461 Questions
355 Questions
338 Questions