2001 Chevrolet Silverado 2500HD "location oil pressure sensor 01" Questions

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

...cherokee 4.0L - Location of Oil Pressure Switch - Rh side of Engine block above starter, 3 wire connector 4.7L - Location of Oil Pressure Switch - RH side of motor next to oil filter, 3 wire ...

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

...OIL PRESSURE SWITCH (SENSOR)  http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html  ----------- How to Check Differential Oil Leaks and Replace ...

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

...oil level sensor connector. Remove the power steering pressure hose retainer brackets from the engine front cover studs (two places). Position the power steering pressure hose (3A719) out of the way. ...

...pressure oil system pump lack of oil in resovor ect also check all fuses and relays under hood these are not as user frendly as the older 7.3 s were good luck The inertia fuel shutoff switch is ...

Question about Chevrolet Silverado 2500HD

3 Answers

pressure. with this done will need to reset the monitor. as of now i do not have info in front of me but you can do it yourself look in owners manual it will tell you how. i f i remember correctly you

Question about Chevrolet Silverado 2500HD

1 Answer

...oil pressure light comes on and engine won't turn over. Everything else works but no power going to starter. Wait about one hour and a half and it starts fine. Oil level is OK. Is there an oil ...

oil-on-spark-plugs-and-car-misfires.html ------------ Can cylinder misfire Damage the Catalytic converter? http://schematicsdiagram.blogspot.in/2012/02/can-cylinder-misfire-damage-catalytic.html -----

oil will look like black coffee with a lot of creamer in it. Kinda brownish color. Check that first. Also visually check to see if there is any stains on your cylinder head and engine block. These can

Question about Chevrolet Silverado 2500HD

2 Answers

...location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's ...

...oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have ...

Not finding what you are looking for?
Cars & Trucks Logo

818 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...