2001 Chevrolet Silverado 2500HD "blower fan resistor check" Questions

...blower motor resistors pigtail or connector but make sure the heater and fan motor and the ignition switch are turn on so you can here if the motor comes on. A lot of times these blower motor ...

...blower motor as the expert suggested. but fan only runs on high 5 4,3,2,1 still blows the fuse. cant afford all the parts swapping, hoping to get help Check the blower resistor and the connector. The ...

blower motor under the dash. Also check the 7 wire plug going to it, GM had a problem with that plug, and the wiring getting hot and melting. The plug is $68.00 from the dealership. One of my customer

...fan motor for the heater will start on high when the key is off and the truck has been sitting for at least four or five hours, but with the key off if you move the heater speed control from off to ...

...blower fan resistor which is located on or next to the blower fan assembly under the passenger side dash in the footwell. if resistor is bad, there will be no fan speeds. make sure you are getting ...

A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa!! Check your blower motor fuse as the high fan runs on a separate fuse than the other fan speeds

...fan blower located in my 2005 Pontiac Grand Prix. Owners manual has 3 different fans. Is it the HVAC fuse or one of the 3 fans? The heater fan quit and want to check the fuses before taking to ...

When the blower motor is drawing too much current it burns out resistors for lower fan speeds in resistor block, but doesnt blow fuse for fan. Also check for leaves and stuff in fan when removing fan

...blower fan if it is determined a resistor has failed. (a good fan in theory shouldnt draw enough amperage to burn out a good resistor, EVER, so if the resistor burns, the fan is typically drawing too ...

...fan. Could this be the blower motor? and how do I change it? Thanks Chuck It may be the blower motor, or it may be the blower resistor. Check for power at the blower motor. If power present with ...