...brakes now we cant get the pressure back at the pedal.any suggestions? When you bleed your brakes you have to start at the wheel longest distance from the master cylinder keep bleeding and putting ...
Question about Chevrolet Silverado 1500
cruise does'nt work all the time have to pull back cruise does'nt work all the time have to pull back on brake to make it work the brake switch is what is used to disengage the cruise, so I would ...
back side of the brakes and take out the little rubber plug to gain access to the star adjusting wheel on the brake self adjuster. If there is no rubber cover, there is an oblong indentation(knockout)
...getting any juice on the back for the brake lights. I have been told it could be a relay but, I can't find the relay. I have also been told it could be the brake pedal switch. It must be two ...
...are out of adjustment,causing you to over work the front brakes,change rotors and pads,check rear brakes if you need more help get back to me Thanks Ray,Please rate my fix as i strive to be the ...
...off to get the drum off. The semi-floating axles are easier--if you have those you just need to back off the adjuster as I explained. Reach a thin screwdriver into the hole in the back above the ...
Question about Chevrolet Silverado 1500
...back preasure when your stepping on the Brakes you could have air in system,they need bled. sometimes to reset there is a ( I call a little Nil) on brake cylinder just below where you put oil in, ...
moving forward when i back out of the driveway it's fine, when i put it in drive it acts like the brakes are on at first, i am also getting horrible mileage yes the rear brakes are disk brakes.
...brakes has no brake fluid going to them . I change brake clabor can not get brake back up. Check all cylinders on all four wheels. Refill brake fluid container. Also check master cylinder. In newer ...
Question about Chevrolet Silverado 1500
changed calipers on back, can't get any brake pressure back, bleeding them did nothing. If the cylinders are "locked" by corrosion they will not move the pads into the rotor. see if they will move. ...
1,733 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions