2004 Chevrolet S-10 "install rusted rear brake line" Questions

Ad

...brake is activated and the front wheels are secured. Next elevate the vehicle with at least two jack stands for safety and disconnect the filler neck from the fuel tank itself. This can be done by ...

Ad

...is it? you will need a shop to make up a new line. install it and bleed the brakes. hopefully the rest of the lines are ok. Sometimes if the bleeders are rusted, you may need even more parts

Ad

...rusted in the middle of the car frame and blew a leak. If you want to do this yourself, just remove the brakeline. Go to a parts store and buy the length of brake line that you need. Most brake lines ...

...i know .if you plan on keeping this car and you are changing the lines due to rust ..i suggest you install the stainless steel ones to your question..the two back lines are for rear brakes good

Question about Chevrolet S 10

1 Answer

...install the OEM's or original breaks for your Corsica. If a given set of replacement linings are more aggressive than the original, the brakes may feel grabby or upset front-to-rear brake balance ...

Question about Chevrolet S 10

5 Answers

...rear shoes afterwards Check your brake shoes they may have been installed incorrectly or the spring could be installed incorrectly or the springs may be wore out their self I had a similar problem. ...

...rusted line on both sides of the gas tank and at the fitting for the rubber hose going to the axle. Pull the line out from behind the tank (it is in plastic retainers so it may be hard but just pull, ...

...rear brake line as it rusted out. What size are the lines and fittings? Hi, Your best bet is to get the line at an auto parts store. The line would be correct in size and bent correctly for easy ...

Question about Chevrolet S 10

1 Answer

...rear brake line.THANX If it's a rusty brake line that's leaking you'd best replace the whole brake line system (all 4 wheels) for your safety. Fuel lines have the same problem. These are made out of ...

...rusted in two, (was long line under drivers side to rear) bled all four brakes, abs and brake light are now on and will not go off. Have read it could be rear sensor, but what are the odds the sensor ...

Not finding what you are looking for?
2004 Chevrolet S-10 Logo

84 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...