...brake pedal area. It also restricts me from putting brake pedal all way down. Do you think it's a sensor or abs module? It's an '05 model There's a service bulliten about that problem with rust ...
...brake light switch is properly adjusted. It will be under the dash at the top of the pedal arm near where it is connected at the top. Basically, the switch is depressed when the pedal is at rest and ...
...brake pedal then shift the shift lever into gear and then back to park....see if that helps. Another thing to do is to apply the emergency brake when you park then remove the key. Lastly, in the box ...
...brake pedal pulsates and activates the ABS system when the brake is applied at low speeds check rotor and brake pads. also check fluid level. one of those 3 causing problems. more and likely its the ...
brake pedal that is not functioning. There should be a little port near your shifter marked "Shift Lock Release" or something similar. Pry off the cover and insert your key. Engage your parking brake.
...fuse. It's the same fuse that sends current to the shift lock, to unlock it when you step on the brake pedal. If the fuse is good, then have your brake switch, located above the brake pedal,
brake pedal. if you get on floorboard under the steering wheel area, depress the brake pedal you will see the switch the brake pedal should be engaging. It is simple to remove, take to your auto parts
...brake pedal in your car. it contains a spring to let your brake light know you are pushing it. the spring is most likely stuck within the switch. i had to remove mine and fix the spring then reattach ...
...brake pedal switch. Hook up a test light to the switch and press the brake pedal. If the light does not go on and you have power in the wires to the switch then the switch should be replaced. I hope ...
1,032 questions posted
Usually answered in minutes!
754 Questions
491 Questions
178 Questions
198 Questions
134 Questions
