1999 Chevrolet Blazer "cant shift 3rd gear" Questions

shift then i cant" throttle up" too fast or tranny feels like shifting into neutral but if i" feather" throttle until it shifts into third( normal shift 2nd to 3rd) tranny is fine after its into third

cant shift into any gears. It starts in 1st gear and runs fine but will not shift from 1st. It will shift into any gear while the truck is not running but thats about it. you need a new slave cylinder

...cant figure it out? Thanx for the help... ummm i would say you need to adjust your trans shift cable, check your fluid level, and the problem i had with my dodge was similar to yours... it was my ...

...cant shift into 3rd or 4th gear? i still can use 1st and 2nd gera and 5th and reverse. the car had been shifting into third with a grinding noise sometimes and then oter time just fine and all of the ...

...cant up shift, cant down shift hard to shift. (blocks) grinds. my wild guess, based on no input is the clutch linkage, was never adjustED the side kicks (not sport 1.8L) all have cable clutches, and ...

1st and 3rd gear linkage cant shift into 1st or 3rd gears linkage issue? look for a broken cable

cant shift in to 2nd gear but all other gears i can shift form 1st to 3rd but i dont have 2nd gear Is it a Manual Transmission or Automatic? If it's a manual, it sounds like your syncro's are ...

...cant down shift into 3rd or 1st. when i try it goes into where the gear should be but theres nothing unless i put in the gear before 3rd or 1st and back into the gear. we cant guess the tranmission. ...

...that cant up shift due to fuse blown. and last did you scan it, if not why not that be 3rd step after levels, fuses, then scan. if the TCM cant see sensors, it cant upshift, TCM is the tranny

...shift from 2nd to 3rd. when placed in drive it will not from 2nd to 3rd gear.. second to 3rd silonoid is broken. take to trans shop. its inside the pan of the tranny and most people cant fix it ...