1997 Chevrolet Tahoe "97 4 wheel drive" Questions

4 wheel drive tries to engage when i accelerate in my 97 chevy tahoo only driver side does this.when i put it in 4 wheel drive the noise stops manual shift or electronic..if electronic..sensor is wore

...97. Mr D is on the right track, but the popper thingy (4 wheel drive actuator ) is located in the front axle on the right axle tube. It has the 2 wires going to it and threads in and out with normal ...

...4 bolts holding it in place. then grab the output shaft and see if it has any front to back movement. if so pull it all the way to the rear and you should see a groove at the front part of the shaft ...

97 Tahoe won't shift into 4WD. I can hear the actuator moving, but the light on the console just blinks and it doesn't lock in. I live in ND and thought that perhaps it was iced up, but it still doesn

...4 cyl turbo model. Step 6 says "Remove Starter Heat Shield (if equipped)." I'm stuck. I can't figure out how to remove the starter heat shield. It looks like there is a hose clamp going all the way ...

97 toyota 4 wheel drive manual transmission clutch problem have a 97 tacoma 4 wheel drive manual transmission sometimes the clutch will not engage, and i have to turn engine off and restart the engine

...97 FORD EXPEDITION THAT STUCK IN 4 WHEEL DRIVE Possible solution..Expedition uses a vacuum solenoid on the firewall that controls vacuum to the 4-wheel drive actuator. Vacuum "unlocks" the 4-wheel ...

97 Explorer auto 4 wheel drive !997 Ford Explorer that jumps in auto 4 wheel drive when ever it wants check if your ABS system is having isues. This is were the 4WD system gets the input to go into 4 ...

97 model 4 wheel drive V6 asked 2 times>?
Gen 1.
there is no 97, , 97 is july 2 1997 made for1998 year
the wiki tells you that
and the 42RE is there not mated to 3.9L V6 , + 4wd
the PCM

...97 Nissan Pathfinder is stuck in 4 wheel drive. It is an automatic and my 4 wheel shifter is a stick type shifter. It will not move back into 2 wheel drive. Is there a way to do this manually? If you ...