1996 Chevrolet C1500 "connect car horn" Questions

...i had checked. but when i pulled off the actual horn cover (where you push for horn) i found no connection was being made. instead of buy new part i bought some copper b.b.s and the connection

...no sound replace horn /no power check fuses and relay if good remove horn button and check wire and connection for damage and ...

...to the headlight switch. I removed them and ran another fused wire direct from the battery and connected them to it. The horn works plus the interior dome light started working...One more wire

...working. Sounds like you could have lost one of your grounds to the engine block or you have a bad connection in one of your bulk head connectors. Try checking all of your connections under the hood ...

...car so that you can easily locate the horn.then unscrew the horn to its location unplug the wirings connecting to the horns and don't forget which connection is connected to the positive and the ...

...car has horn relay and 2 horns. so,,, do you have 2 horns? no computers here, so is classic, Relay powered horns with 2 horns, 1 wire horns and the horn casing is grounded so if you unplug them both ...

...connect it? A horn with a single wire connection will be earthed out internally and through the body fixture. Horns that have 2 connections are either internally earthed as explained and the second ...

...car replacing to one horn. what is the right connection for this for one horn only? So you have replaced the single horn and it still dosen't work ? both horns or just the one? The reason why the ...

horn do not respond 1. check fuse for horn. 2. disconnect horn and check with volt meter when horn button is depressed. if you see voltage then the horn unit cone is defective or not connected - ...

horn? CONNECT ONE WIRE WITH AN EYELET AND CONNECT THE OTHER TO THE HORN THE ONE WITH EYELET NEEDS TO BE FASTENED TO BODY OR GROUND One wire is for the power, the other is for the ground, (check with a