1995 Chevrolet Beretta "dash radio removal 1993 olds" Questions

...dash on the passenger side. You will need a regular phillips screwdriver and a snubby 2-3" phillips later. Also get a 1/4" socket set. First thing, go under the car and remove the heater hoses from ...

...radio are under dash looks just like a computer. the the display and if you had it a tape playerin the middle. need to replace them together as are matched units. remove instrument bezel rto gain ...

dash off to pull the old radio out I'm not totally sure about the La Sabre, but there should be trim screws that hold the Dash face plate in place. There are three on the top portion of the face plate

...i spent all my money on a radio 2 weeks ago adn cant get teh ragidy *** old one out yet!! EHHHHHHHHHHH!!! Please click here for instructions how to remove the dash board from the car... Good

...radio antenna cable. Tag and disengage all underhood electrical connectors of the main wire loom. Disengage the rubber grommet from the dash panel and push the wire and connectors into the instrument ...

dash, driver side and the underhood relay center?) Uh-O you do have a problem. The headlight switch can do this (reports the lights are on with the key out and the door open and it doesnt reconize the

...radio and other dashboard-mounted optional equipment, as required. Remove the floor console, if equipped. Remove the floor and defroster distribution ducts. Remove the bolt holding the right side ...

...dash in hopes that it was a short or a mis-wiring, on my part perhaps since I have installed various electronics, such as a CB radio and a cd player...but not anything I could find. Is there a fuse ...

...dash lights or a radio. In my personal experiences, most of the time it was a battery issue. How old is your battery? When you try to start it, do you hear a "clicking" noise coming from your engine? ...

...DASH LIGHTS AND GAUGES WORK WHEN YOU TURN ON IGNITION SWITCH IF NO CHECK IGNITION FUSES.IF FUSES OKAY IGNITION SWITCH IS OPEN NEED REPLACING.NOW IF BATTERY VOLTAGE IS 12.6 VOLTS, BATTERY CABLES GOOD ...