1991 Chevrolet S-10 Blazer "vacuum hoses" Questions

Ad

Question about Chevrolet Blazer

1 Answer

vacuum hoses off one at a time near the intake manifold to see if the engine idle changes, - don't forget to check the hose to the brake booster. If pinching off the booster hose fixes the running

Ad

...vacuum? Broken hoses are common. Blazers usually have a vacuum reservoir mounted on the hood panel on the driver's side. (dumb place, if you ask me) I have seen the hoses to the reservoir broken many ...

Ad

...vacuum hoses, and especially the one that goes to your pot. You should hear it hissing when the engine is running. If not, wiggle them around until you find one. Let me know how it goes. There is a ...

...stalls but does not completely shut off Check/replace the PCV valve, and its associated connection vacuum hose for deterioration and leaks. Check for any other vacuum leaks on the air intake system. ...

...dr found hose on top of trans not hooked to anything this hose might go to your intake manifold vacuum source, it should go to a vacuum modulator on the transmission. it changes shifting based on ...

the front axle would stay locked in, and may cause more probs down the road. the vacuum pump on the transfer case is about 200 bucks. it cost me 10 dollars for the valves and hoses... hopes this helps

Question about Chevrolet Blazer

1 Answer

...hi lights up but will not engage The first place I always look is under the battery tray. There's a vacuum operated actuator mounted to the inner fender that has a rather large diameter vacuum hose ...

Question about Chevrolet Blazer

1 Answer

vacuum hose to nowhere please help me find a vacuum hose sehmatics for a 2000 chevy s10 pickup http://www.autozone.com/UseCase,S001/UserAction,viewSimpleDiagInfo/Parameters,info/getInTheZone.htm

need a vacuum hose diagram for a 2000 s-10 blazer vacuum hose diagram Its on a decal under the hood of your vehicle by the hood latch. Thats pretty much all there is not a lot of vacum other then EGR ...

...vacuum hoses and replace and damaged parts and reconnect the vacuum line to the vacuum switch. This should get your 4WD running 100% again. Thank you for using Fixya and good luck, if the switch is ...

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

589 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...