...s10 blazer back wipper won't work no washer fluid will not come out of the rear washer and the rear wiper wont work,the frount wipers and fluid work just fine.what is wrong? fuse or broken wire Check ...
Where is the windshield wiper motor relay located on a 97 chevy s10 blazer its located on the wiper motor.there a black removeable cover thats held on by some screws .remove that and it right there
windshield wipers will not work on 1994 s10 Have you checked for power at the fuse and the wiper motor ?
...wiper module go on a 1989 S10 blazer You have a panel on the fire wall where the wiper motor is connected. There is a 3" by 3" panel on the wiper assembly is connect to. It is helt on 3 to 4 torque ...
...1991 S10 PU 2 WHEEL DRIVE TO GET TO COLUMN MOUNTED WIPER SWITCH the wiper switch just pulls out with a little force you only need to pull the steering wheel if you are removing the turn signal
Question about Chevrolet Blazer
...s10 blazer the washers come on and the blades move only a little or not at all turn on the switch sometimes it makes a noise like its trying to work sometimes not. most of the time but not all the ...
need wiring diagram for 85 s10 blazer 2.8 liter I have most all of the wiring diagrams for your vehicle. Can you narrow down what you need as there are many? If you need me to send them to you then ...
...speed. I have replaced the fuse and that did not fix it. Any ideas? Mine did the same thing on my S10 pick up. I took the motor off, drilled out all the rivets, cleaned it made sure the brushes and ...
were is the wiper blades fuse at on a s10 1991 blazer UNDER THE HOOD IN THE HARNESS BOX
...wiper on a 1996 Chevy S10 Blazer pull off the plastic cover on the tait gait. then drill the pop rivits out if not already done. switch the motor and put some self tappers in the place of the rivits. ...
589 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions