1991 Chevrolet S-10 Blazer "removing lower control arm chevy" Questions

Ad

...lower controll arms and the suspension is "loaded" Remove the front tire(s) (if you break the torque on the nuts while the wheel is still on the ground it helps, but do not loosen them completely as ...

Ad

...the balljoints and tierod. Keep lower control arm supported with jack, support frame with jackstand. Pull out old one stick in new one. Reinstall spindle, hub assembly. Have the allignment

Ad

...lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with ...

...lower control arm from the spindle to replace the joint. First of all . Make sure that the control arm bushings are good on the control arm. If they have any deterioration or cracking, it would be ...

...lower control arm on 2000 chevy tracker Remove the ball joint nut. Use a hammer and hit the spindle where the ball joint goes threw it. It will release eventually. Remove the sway bar link and the ...

Question about Chevrolet Blazer

2 Answers

...lower control arm nuts and remove knuckle from vehicle. Using a ball joint press remove and install the ball joint. tighten axle nut (4x4 only) to 133 lb-ft after everything is assembled. you need to ...

Question about Chevrolet Blazer

1 Answer

...lower control arm My son hit a curb in the snow and bent the front suspension....he took the lower control arm and now I am trying to put it back together again. I need a diagram of the Chevy Aveo ...

...lower control arms both how do you access front bolts to remove ,if iremove engine torque strut mount will engine drop or shift ,also how do you get access to nut on same bolt it doesnt look like ...

how do i change the steering knuckle in my 06 chevy cobalt Support lower control arm with jack, remove all nuts pertaining to, remove cv axle, shock them off with 2 hammers.

...lower control arm on the front of the vehicle, and also removed the rear bushing on the control arm. How do I reinstall the new bushing? The new bushing seems just a tad to big to install. Hi Dan: If ...

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

589 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...