2001 Pontiac Sunfire "pilot bearing" Questions

...pedal, the throwout bearing, or pilot bearing may be bad, and clutch replacement will be needed. be sure to have the flywheel resurfaced and replace the rear main oil seal while the flywheel is

bearing, pilot bushing or bearing and slave cylinder is replaced.  That is the only way to guarantee a trouble-free clutch relacement.  The original clutches usually last over 100.000 miles

...pilot bearing or the throw out bearing. Very odd to have pilot bearing go, unless very high mileage and was not changed when clutch was done. Dodge diesel truck forums talk of problems with pilot ...

...pilot bearing in the trans and the pilot bearing would not come out and it busted the peace in the crank that hold the pilot bearing in crank can i buy this part also i have no idea what to do never ...

...pilot bearing? i am trying to memove a clutch pilot bearing, it is a roller type bearing, i was useing a bearing puller but the jaws on the puller wouldn't fit over behind the bearing, i ...

pilot bearing on my 95 GMC Sierra truck. You first have to remove the transmission, then remove the pressure plate and clutch disc from the flywheel. the pilot bearing in in the center of the flywheel

is there a pilot bearing on the clutch The pilot bearing is in the flywheel, the mainshaft from the transmission sits inside the pilot bearing.

...The pilot bearing is located in the center of the flange of the crank shaft, to remove it you need a bearing puller or hook, bronze bearings can be removed with grease and old pilot

pilot bearing on 1985 Nissan truck. I am replacing the pilot bearing on a 1985 nissan truck. The pilot bearing is not like a true bearing but more like a sleave. Once it is pounded into the crankshaft

...pilot bearing from a 83' 258 I have taken everything off the back of my engine, and now see that the pilot bearing is ruined. How do I remove the bearing from the back of the crankshaft? Fill it with ...