break pads look fine and dust was cleaned. Breaks are still squeaking. Every so often there is a soft clunk when I take foot off brake to the gas. Help! semi-metallic pads can cause noise from glazing
Faulty pressure regulating valve? 1996 Fiat Uno Fire. Back breaks are locking. Can I remove and clean the pressure regulating valve instead of replacing it? Will this work or do I have to replace the ...
foot break stuck down 1994 dodge intrepid will not release the foot break pedal,stays down Your master Cylinder has bit the dust. It will need to be replaced.
...rear left side wheel rubbing as it rotates. heavy brake dust, but squeakng occurs without engaging breaks. Drivetrain issue? Rubbing what? If there is heavy brake dust you more likely have worn out ...
...break dust. If there is a ridge you should have the drums turned on a lathe or replaced. Purchase a new spring kit for both sides. In stall in reverse order. If you have trouble removing the drums, ...
...coming from the hub. I took it to the dealership and the told me it may be the dust cover on the breaks. Pulled front brakes apart and nothing is rubbing on dust cover. The noise is loadest around ...
dust forming on the rims. If the squeeking is happening over bumps, and is not related to breaking, it could be a bearing in the steering linkage. My tahoe is doing the same thing, and my local garage
...the pedal, but rock hard the second time sounds like break caliber is sticking it will be on one side. it is not releasing. there will probably be brake dust on your wheel on the bad caliber good ...
s-10 breaks How do i get the hub off my wheel, so i can replace the dust cover/break backing plate? brakes? for stopping or it breaks in half
...while i have it apart i spray the components with break clean and scrub the excess break dust off the brakes. ***TRY NOT TO GET GREASE ON THE BREAK SURFACES AS THIS WILL EFFECT FRICTION
1,202 questions posted
Usually answered in minutes!
613 Questions
518 Questions
483 Questions
458 Questions
361 Questions