...shoes and it slides off easily. The cutting operation took less than10 mins, alot less than the puller with hammer assist! I know this is a bit "unorthodox" to say the least, however the object is to ...
...brake fluid from an open or not tightly sealed container). After rebuilding or replacing the caliper or wheel cyl. bleed all 4 wheels to flush out old fluid, otherwise you may have other wheels w/ ...
...brake shoes!! and am trying to replace the seal!!! i have it all stripped down and have taking the four 13mm nuts off from behind the hub i can see the offending seal but can't get the hub off to ...
...brake, there is a threaded rod with two nuts, one adjustes the other is a "jam" nut. I am not sure if you can on that modle but raise the truck follow the cable and if it is adjustable you will ...
...replacing. Is your e-brake on? If I'm not mistaken, the ebrake shoes are attached to the rotor. Sometimes rotors will have two threaded holes near the wheel studs on the rotor. They are there ...
179 questions posted
Usually answered in minutes!
216 Questions
93 Questions
26 Questions
5 Questions
4 Questions
