2000 Nissan Maxima "damper" Questions

Bolt on crankshaft to remove clockwise or counterclockwise? Crankshaft Damper/Pulley counterclockwise to remove pulley: REMOVAL & INSTALLATION Remove the drive belts from the crankshaft damper. ...

noise at main pully on crank,looks out of round at low rpm rubber damper sandwiched in the pully may have crumbled. Remove belt and check pulley for play. If there is any play, replace the damper. Let

...cold setting in the early morning if its not even cool and heats up fast then Rob is correct. ITs a damper/ temp problem which is eternal. You can tear apart you dash and check on the damper (looks ...

2000 nissan maxima vibrations on 20 to 30 miles an hour from front end... check damper on crankshaft,rubber may be broken.

rear struts for 98 nissan maxima rear suspension mc pherson type dampers and if iam not mistaken you will need spring compressors to change them .

up a hill and it shakes when you drive it and when your stopped at a light could be an engine mount damper rubber is loose or could be a wheel bearing ( but definitely only when moving

...hot or anything. Thanks! Angie could be just something as simple as the idler/tension pulley damper. Take a look at the belt and pulleys when the car is idling. When normal everything runs ...

how to remove the belts from crankshaft damper on nissan maxima 1996 If you have the older style V-Belts you have to lossen a couple of the accy's--alternator,power steering pump, air pump,etc For a ...

...number one piston at TDC on the compression stroke by aligning the timing marks on the crankshaft damper. Fig. 6: The number one cylinder is at TDC when the timing marks are aligned as shown (clikc ...

...wires could be crossed on the wrong poles from the fan motor.Also this sounds like you are having a damper air mix door problem which it as well is in the same location as the fan motor it has a ...