2003 Ford Explorer "truck door lock linkage" Questions

...door lock switch does not lock, only unlocks all doors. The key fob switch works on all doors. Broken switch? May be switch but could also be bound up linkage &/or door lock actuator. Pull ...

...lock actuators There is an actuator in each door. To replace, remove interior door panel on door then unbolt actuator & dissasemble linkage that attaches to it & door lock cylinder

...door. Make sure th retaining clip is in place and fits tightly on the linkage arm to lock it in place. The locking clip may have fallen off the rod and may be on the bottom of the door. If you can't ...

...by pulling interior door handle to open the door. Sounds as tho your lock linkages have came loose from the door lock mechanism. The door panel will have to be removed to check and repair the

...DOOR DONOT LOCK OR UNLOCK BUT ALL OTHER DOORS DO you will need to acess the lock motor and check for power first . if you have power to the lock then the lock motor is bad unless you have a linkage ...

door locking mechanism can't close the door Check if using the manual locks work, if not you have to inspect the linkages. If it is only the power locks then it may be the switch if all are not ...

...the motor but it won't go up and down? in side door panel must be removed look near the lock &lock motor a linkage most likely came off may need a new. clip to replace.if this helped please

door lock problems Driver door switch/button unlocks and locks all other doors expect unlock drivers door? You most likely have a worn out actuator on the driver side door.  When you push the ...

...door does not lock I have a 1998 explorer eddie bauer edition. The problem I am having is the drivers door does not lock. The button goes down as if it is locked but I can still open the door. Anyone ...

DOOR LOCKS(POWER) UNABLE TO OPEN DOOR DRIVERSIDE BACK UNABLE TO CLOSE DOOR PASSENGER SIDE BACK your linkage has come off in side the door