2003 Ford Explorer "driver door key lock rod" Questions

...key the lock knob goes down but doesnt lock the door Pull panel off and have a look at the connection rod and latch assembly. Rod should go from lock/handle to key hole, to latch assembly. Could also ...

driver door only locks with key. Shake the door and something rattles in the bottom of door. Seems like something broke off. didnt break anything the door has a "dropped rod" the rod that connects ...

driver side door will not my 1998 4x4 ford explore driver side door will not lock, door handles were broken. i am in the process of doing it my self, and i just happened to run into tiny problems. for

...driver side door lock? Not sure if lock has solenoid or electric motor, but either way, can you hear clicks or any prominent sounds from the door whilst trying to unlock it? you may need to put your ...

...Driver's door lock switch does not lock, only unlocks all doors. The key fob switch works on all doors. Broken switch? May be switch but could also be bound up linkage &/or door lock actuator. ...

driver door broke and wont open Sounds like a control rod issue. This will be a huge pain to deal with, as removing the door panel to gain access to the rods with the door closed is anything but easy.

...door lock will not unlock with the key it wont open from the outside or inside The door latch is the cause of your problem. You can pull the top of the door panel off and look down with a flashlight ...

driver side door is jammed and the lock won't open it and neither will the key .how can it be fixed.it's a 1998 ford explorer you need some one to open it with slim jim once you get it open then check

...driver isde door any longer with my key. On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there ...

...key to open the door from the outside, I have no tension, I know there is a plastic piece that dissconnect from the rods, also I cannot open the door from inside, the inide handle is not flush but it ...