Question about Ford Explorer
...fuse for the alarm, remove the fuse, see if it will start and then shut it off, than replace the fuse. or try just removing the negative off the battery post of the battery of the car that will reset ...
...alarm you will have a fuse that you can pull to disable the alarm either under the hood or under the dash. Some will have a toggle under the dash. If this is a factory alarm look in the owners manual ...
...fuse back before starting it the alarm will just continue to try and reset itself, but not start the car. If that doesn't work I have a mechanic who can pull the whole alarm out and when hes done it ...
...I reset my alarm so that if someone opens the door the alarm goes off? Check your door switch. Does it still operate the light. If not, it is safe to say that is it. also check relay in fuse ...
...fuse controls the factor alarm system in a 2003 Ford Explorer, my neighbors car alarm keeps periodically being set off (lights flashing/horn honking) none of us can find the correct fuse in the ...
...fuse is ok.It has an aftermarket alarm. I dont know if it cuts the fuel off. It has a pushbutton under the dash which either puts the alarm in valet mode or arming mode. When in arming mode(no dash ...
...alarm the the lights flash but the horn will not work, and the curise control no longer works. Any Ideas where to start? could the ingress of water have got inside the control box?? or the wiring ...
horn and alarm not working . Thanks CHECK FUSE PANEL FOR BLOWN FUSE.
...alarm on my 2003 Ford Explorer keeps going off for no reason can i just pull a fuse to get through the night you could just pull the fuse, the technician will work out the rest. then you'll get some ...
96 explorer was changeing battery with engine running and after market alarm fuse blew and now nospsrk and no fuel pump Check the fuses and or replace Crank and Cam sensor.
2,160 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions