...p1776. When the code was set the trans went into what they call "limp in mode". This is a safety feature that allows the vehicle to still driven in second gear so to make it to a repair shop or off ...
what is causing my car to say transsmisson control problem I have these codes PO700 P1776 PO870 and TSB's P0700 Transmission P01776 Ignition ****** request. P0870 Transmission fluid ...
Car bucks and going over 40mph and has the following codes P0016, P0344, P0700, P0841, P1776 hello, Clear the codes by disconnecting battery for 10 mins then reconnect then re check for codes. Let me ...
...code p1776.Solenoid switch valve latched in lr position. Do i need to replace solenoid pack or valve body for this error code? I was told it could be either one depending on the date stamped on the ...
Describe your car codes po700 p1776 po871 Problem will not shift out of 2nd sometimes limp mode is coming on cycle the key i forget 10 or 20 times i think 10 if your driving you can put in N and do it
...your transmission replaced. That is the P1776 code, and it is what is causing the P0700 code. Also, make sure to do a transmission fluid flush and change, along with changing the transmission
...when you get a p1776 code on 2002 dodge intrepid What does the code mean P1776 is the code for soleniod stuck in low,reverse. Probably just need to have your fluid flushed and get a new solenoid
...P1776 code means your solenoid switch valve is stuck in low reverse. (DTC 47) A stuck solenoid switch valve is a common occurrence in the valve body of the Dodge 41te transmission. The first step ...
Engine Code P1776 Generally speaking, the code for Dodge involves the low-reverse solenoid in the transmission. It may be stuck or defective.
790 questions posted
Usually answered in minutes!
1,166 Questions
867 Questions
924 Questions
766 Questions
627 Questions