...shifter cable is popping off. What is most likely the cause, the cable head is worn or the ball on the shift lever is worn down ? What wears out ? Joe The cable wears out. The head just wont hold on ...
...shifter works off a shift cable which is connected to the transmission. The connection of this cable to the transmission is on the drivers side looking straight up were you can see it. The other end ...
...like normal. please help! Shifter cables are easy to replace you just need to make sure that you are doing it correctly so do one end at a time. It sounds to me like it got really tight and ...
...in and out of gears by moving the shift bracket by hand. How do I fix this problem? Do I need to replace the whole cable or can I just replace the end of the cable? cable needs to be ...
...end of shift cable back on because it dosent line up! please help! Ok, here is what you do, slide under vehicle, locate shift lever on side of transmission rotate counter-clockwise two clicks, pop ...
Replace both cable pieces if the metal couplings are separated. Both of the cable section will be damaged if the two metal couplings are disconnected. Push up to the adjustment position to release the
...end of the shaft. Put an oil drain pan under the transmission tailshaft, slide the shaft out of the transmission, then unscrew the speedometer cable from the tailpiece of the transmission. Place a ...
...shifter to the transmission? They often stretch or break & become difficult to move Or fail to move lever on transmission properly. could be linkage calbe may need to do it slower and twice i found ...
...gives pictures...you replace one end from under the hood...the other you may have to get under the car...if your skinny no prob..if not ...get some jacks...book will explain
882 questions posted
Usually answered in minutes!
776 Questions
549 Questions
460 Questions
342 Questions
278 Questions