...pump relay and see if it stops. If it does replace the relay with another relay with the same part number in the relay box. If the pump stays off than the relay was bad and needs to be replaced. if ...
Question about Chevrolet 1500
...pump relay and the fuel pump. When i turn th Ignition switch on th fuel pump doesnt come on. The fuse is good. I got 12v to th fuel pump relay but it doesnt come. If I spray starter fluid in th ...
...Pump Relay Testing is this the first fuel pump for your tahoe --if it is their is a known problem - you would need to test and inspect the pump and harness connections at the top of tank as well as ...
...pump relay that is hot. Truck has only 87000 mil, and has always run very good. When ign. truned on relay will click and pump makes sound. No power to pump. Should there be power to pump? All fues in ...
...pump relay, and fuel pump: Turn the ignition OFF. Remove the relay. Locate the two terminals on the relay, which are connected to the coil windings. Check the relay coil for continuity. Connect the ...
Question about Chevrolet 1500
...pump relay & fuze location for 1994 chevy 51500 pick up Truck was running fine until I came out of grocery store. Engine is turning over just fine. Cranks for a split second when a little carb ...
pump relay! There should be a fuse in front of the relay. The fuse could be under the hood near the battery or near the firewall. Some fuses are under the dash next to driver. Hope this helps. Not the
...pump relay, secondly, it may be a broken connection in the wiring, check underneath to see if there has been damage to the wiring leading back to the pump or if a connector has been unplugged. Worst ...
...pump relay. You might find it in the engine compartment, at the driver or passenger side and close to the windshield or at the front of the engine as part of a cluster of relays. Another common place ...
Question about Chevrolet 1500
pump relay I have 12v to th throttle injectors but no pulse. I have 12v to th coil but no fire. Got 12v to all fuses. Th code shows no problems. Its like I have 12v to everything but nothing works. Hi
1,105 questions posted
Usually answered in minutes!
878 Questions
795 Questions
575 Questions
561 Questions
414 Questions
