1997 Chevrolet K1500 "cam position sensor" Questions

Ad

...cam & crank position sensors for a 1999 chevy suburbon 5.7? THE crank sensor is located at bottom of timing cover on front of engine if you look under engine below crank pulley around oil pan ...

Ad

cam position sensor on a 1997 chevy 5.7L The camshaft position sensor (also known as the distributor pickup) is inside the distributor which is driven by the camshaft gear and directly below the water

Ad

cam code (1345) If fuel pressure is good (55-60 psi) expect to replace the camsensor you might as well do the crank sensor heres a nightmare on this code it can set if the distributor is off one tooth

...cam position sensor is also a notorious failure, so that's a possibility. Most likely it is that the MAF sensor has caused an evaporative emissions systems error, and the engine timing is one of the ...

...cam position sensor. You should use a LED testlight, (NOT A BULB TESTLIGHT!!) and backprobe the injector terminals (with the other lead of the testlight to ground) while cranking the engine over. If ...

...cam sensor on a 1996 chevy 5.7 liter engine? if you are referring to the CPS camshaft position sensor, it doesn't appear that your engine has one. my auto parts store catalog says that it has no info ...

Question about Chevrolet 1500

1 Answer

...not spraying why?? Check the crank position sensor and the cam position sensors. When these go, they go without warning. Check for continuity across the connectors, should be less than 100

Question about Chevrolet 1500

1 Answer

cam shaft position sensor and it is running rough...i know i timed it right ...it was top dead center...any suggestions The timing cant be adjusted, you will need a scan tool to set Cam ****** Offset.

Question about Chevrolet 1500

1 Answer

and set the timing. Why will it not start check crank position sensor. check cam position sensor. Have the fault codes read for fault. Check key battery is not flat causing the immobiliser not to work

cam position sensor on 2007 chevrolet 5.3l silverado 1500 ltz. cleared up code for crank position sensor now code p0340 for cam position sensor circuit is showing up. dont have a scope or scanner Then

Not finding what you are looking for?
1997 Chevrolet K1500 Logo

1,105 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...