1997 Chevrolet K1500 "bleed brake pressure modulator valve" Questions

Ad

Question about Chevrolet 1500

2 Answers

...BRAKE PRESSURE MODULATOR VALVE.BECAUSE AIR TRAPPED IN VALVE ASSEMBLY.THE TECH 1 OR 2 SCANNER YOU HAVE PUT IN THE FUNCTIONAL TEST BLEED AIR OUT OF VALVE ASSEMBLY.THEN YOU CAN BLEED BRAKES MANUAL. ...

Ad

...brake booster as these were bad. truck has a 4wal Kelsey hayes abs module. I bled all 4 wheels until I was blue in the face. I even tried reverse bleeding the system. still nothing. I noticed when ...

Ad

Question about Chevrolet 1500

1 Answer

...Bleed the individual brake circuits at each wheel. Switch the ignition ON . Use the hand scanner to perform 3 function tests on the system. Carefully test drive the vehicle at moderate speeds; check ...

Question about Chevrolet 1500

2 Answers

...brake system. Bleed the system as many times as needed to obtain the appropriate feel of the brake pedal. brakes wont work after replacing everything new on the truck wheel cylynders brake pads all ...

brake fluid is flushed out of the system and replaced with fresh fluid, which will improve the overall performance and reliability of your brakes. best is pressure flush bleed as the factory did day 1

brake bleed. But on yours, I think it's different according to the manual. --- What do you mean change the cal. on the rear also? Do you mean Caliper? Sounds like you got air in the rear brake circuit

brake lines. New MC and New ABS modulator. ? No fluid in the front right or the back brakes. (edit tell all new parts first) for brakes !!!) we bleed the 5 different ways (tools)_
if the MC is bad,

Question about Chevrolet 1500

3 Answers

...brake vaccum booster, although that doesn't seem the problem. You first need to make sure your master cyl is bench bled. with a hose bleeder kit, you can bench bleed in-car. you should be able to ...

...bleed the brake pressure modulator valve next. Follow this sequence if it is necessary to bleed all four wheels: 6.1.Right rear wheel cylinder or caliper. 6.2.Left rear wheel cylinder or caliper. ...

...front - left rear - right front.WARNING IF ALL FAILS YOUR BRAKES DONT FEEL SOLID AND FEEL VERY SPONGY.DONT DRIVE CAR. HAVE IT TOWED TO DEALERSHIP.THEY WILL HAVE TO PRESSURE BLEED YOUR BRAKE

Not finding what you are looking for?
1997 Chevrolet K1500 Logo

1,105 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...