1990 Buick LeSabre "connect rear turn" Questions

Ad

rear lights won't turn on. Every once in a while, they'll turn on for about a minute and then off again. The caution lights don't turn on, the blinker doesn't turn on, and the brake lights don't work.

Ad

turn signals flash rapidly on the front of the vehicle, but do not work in the back. Is this the relay? If so, where is the relay switch located? Replace rear bulb, also check for poor electrical ...

Ad

rear door panel and disconnect the window motor and connect a test light to the harness and have someone depress the switch and see if the light turns on, if it does then your motor is the problem, if

...rear shocks. If the compressor still fails to come on, you'll need to unhook the harness connector at the compressor. Again, with the key ON, engine OFF, height sensor compressed connect a voltmeter ...

...Rear flashers work (blinking rapidly), front bulbs stay on, inside indicators also flash rapidly. Replaced control module under the dash. Did not help. What else could it be? Hi there., when ...

...rear defroster stopped working last spring... naturally, I put off fixing it until the first snow this year reminded me that it was broken. The light in the dash still lights up when I try to turn on ...

Question about Buick LeSabre

2 Answers

...rear tire . Follow the fuel line and you will find it there. 2000 Buick Lesabre 3.8L SFI OHV 6cyl Fuel Filter located: Look under the vehicle - follow the fuel line from tank. Removal & ...

...rear integration module (RIM) data list. Does the RAP Output indicate OFF? -- YES - Go to Step 4 NO - Go to Step 10 4 Turn ON the ignition, with the engine OFF. Using the scan tool, command the RAP ...

Question about Buick LeSabre

1 Answer

...turn on anymore when I try to activate it. The light in the dash just stays a solid green and nothing happens on the outside. These are two seperate issues: the light staying on solid green indicates ...

...turn how can I lease them Verify that the foot pedal has returned to its off position. Lube with WD-40 all connection areas of the parking brake cable especially where it enters cable shielding. ...

Not finding what you are looking for?
1990 Buick LeSabre Logo

531 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...