...crank and distributor are out of sync. So before you start buying sensors and other misc. parts, try the distributor gear if you are getting a P1345 code. When you remove the camnshaft, or move the ...
...Crank Sensor you have to remove everything that is in the way of getting the harmonic balancer off, to do that you will need a H/B PULLER, after that the sending unit is right behind that should be ...
...99 chevy tahoe. will not start after gas was pumped. changed fuel filter and additional ignition parts & sensors. More likely the fuel pump or fuel injectors? If you add a few tablespoons of gas ...
...crank shaft position sensor and ignition control module are giving signal to fire the coil, confirm base timing and the condition of cap and rotor plugs and wires. The pcm fuse and ign fuse must be ...
crank it it began to turn loose and when we turned it by hand it came completely apart. We turned it in both directions allowing it to come completely apart. I've been told you can't rebuild an engine
1,551 questions posted
Usually answered in minutes!
847 Questions
676 Questions
601 Questions
604 Questions
457 Questions
