1998 GMC Sierra "engage 4 wheel drive 1994" Questions

...line then. Try and rock the vehical back and forth forward to reverse and back a few times. Some owners manuals say to do this to engage 4 wheel drive. SOmetimes takes a bit to get the gears to

...engage I have a 1994 gmc 4x4 and the front axles wont lock into 4 wheel drive, we checked and there is power to the control that engages the front differential,, any ideas If Your Front CV shaft is ...

...engage i have replaced the actuator switch but i noticed that when in 4 wheel drive the front drive shaft spins but tires dont lock so i researched and it said to leave the atuator switch hanging to ...

...4 wheel auto engage relay , maybe is not working. Is very clearly mark, I believe is the top right one looking at the bost front front of vehicle to the back. There is a diagram drawing of each relay ...

...engage at all. i would like to know what the problem most likely is thank you It sounds like the electric motor for the 4 wheel drive may not be engaging. It could also be the magnetic clutch for the ...

...4-wheel drive. The four wheel drive won't engage when the button is pushed. A new four-wheel drive motor was put on last year, and it worked fine until the truck was parked for about 6 months. The ...

4 wheel drive engages but will not disengage,continue driving and eventually will unhook with loud clunk what is the vehicle? some trannys have a solenoid whick engages and locks 4 wheel i cant help u

...engage in 4 wheel drive manual or auto hubs?how do u now it is not engaging?.u can lift the front end up in 4 wheel make sure hubs r engaged .rotate the tire by hand ,and check to see if the drive ...

...engage 1994 GMC jimmy 4.3 ltr vortec. Push button 4x4. I push 4 low transfer case engages into low gear but front hubs don't engage. the truck is in 2 wheel drive but in low range. Could be ...

4 wheel drive out , I was climbing a snowy hill when there was a clunk in the front, sounds like gears slipping not engaging, Now only the right rear wheel works.Theres still aslipping of gears not ...