1993 GMC Sierra K1500 "timing marks ignition set" Questions

...timing as long as the ignition rotor is in that position when the engine is at top dead center.If the engine is at TDC and the ignition rotor does not point to the #1 mark on the distributor housing, ...

timing lamp, but I don't know the right mark, it says 10 degrees BTDC. The pulley has 6 marks, which one is the right one? the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2

...timing marks to "0" degrees, and the timing marks must be set at "0" degrees before the distributor can successfully be installed. Be certain that the timing marks are set at "0" degrees and on the ...

...timing i have 2 marks then have 3 marks after it Hello! Timing is set using the RED mark...It is the middle mark in the equally spaced group of three marks...Set with engine at normal operating ...

...timing to number one cylinder compression stoke you messed up. get engine to number one compression and set mark using dampener marks. ...

all done electronically by the ECM and the Crankshaft Position Sensor. The days of timing lights and marks are long gone. https://www.google.com/search?q=04+Nissan+Quest+3.5+setting+ignition+timing ..

...cam is at TDC, so is the crank. until you have this resolved the marks on you crank pulley are meaningless, in other words you will not be able to set the ignition timing. sorry this is hard to ...

...timing marks? The ignition timing is set at 10 degrees BTC. the marks are at the front of the engine and the degrees are scaled onto a raised molding on the plastic timing belt cover. There is a line ...

...ignition timing is not adjusted with a timing light or with the engine running, and to set the ignition timing follow these proceedures. There is a mark or notch on the distributor housing that the ...

...ignition timing is not adjusted with a timing light or with the engine running, and to set the ignition timing follow these proceedures. There is a mark or notch on the distributor housing that the ...