1993 GMC Sierra K1500 "ares" Questions

Ad

what is holding the bell housing from seperating from transmission. i cant get the gears out sometimes there are pins inside that are used for alignment purposes, try taking a RUBBER mallet and GENTLY

Ad

Question about GMC K1500

1 Answer

Rear lights Turn signals not working correctly. They are dim and when brakes are applied light up on both sides (dim). No backup lights and no 4 way flashers. Fuses are all OK. I think you have a bad ...

Ad

Question about GMC K1500

1 Answer

driver side air on the duel climate control is blowing hot and the rest of the vents are cold Joey i had a similar problem in my 2000...The problem lies in the A/C Actuator. The Actuator is what opens

Question about GMC K1500

3 Answers

Changing brakes and rotors I used to do my own brakes all the time on 70's & 80's era trucks. Are these brakes basically the same as before. Just compress the cylinder on the caliber insert new ...

Question about GMC K1500

1 Answer

I have a 2002 GMC sierra that is misfiring on three different cylinders why? Could be a coil problem or what controls the coils. like a crankshaft sensor camshaft sensor. Maybe the injectors are ...

i have replaced the brake booster twice and no change.its making a hissing noise inside the truck by the pedal and when the truck is runningthe pedal goes to the floor.when the truck is not running it

I started engine ran for 30sec it shut off there is no power to ignition there are no dash lights headlights and interior lights work fine at the starter there are several wires that go to the big ...

i have a 1993 k1500 4l60e, will a 94 s10 blazer 4l60e be compatible? I have a 4L60E in my GMC and it blew i replaced it, everywhere i went said they are year spacific. If you cant find a 4L60E look ...

Front drive shaft not fully engaged in 4WD, with truck on stands all 4 wheels do rotate but if i stop front wheels the front drive shaft is not engaged Hi, Do you have auto locking hubs on the front ...

i have a gmc seirra k1500 5.7L V8 and the engion is knocking and is really loud it started of with a ticking noise is this due to a bad plug? Yes this is definitely due to timing or plugs. First check

Not finding what you are looking for?
Cars & Trucks Logo

508 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...