2002 GMC Sierra 1500 "bed box replace" Questions

...bed box to the frame, disconnect the rear light wiring harness and the fuel filler pipe. Set up a pair of saw horses or something behind the truck. Then have four guys to lift on all four corners and ...

Changing the bed on my 03 Silverado 2500HD. My original bed is shot from an accident, and I am replacing it with a utility bed from a CSX railroad truck. The bed is in good shape, but it is on a 1 ton

...box from the frame. If you remove the tank it is held up with two tank straps and the lines must be unhooked as you lower it. good luck unless you have access to a lift. If you have access to sheet ...

...not work. If you didn't remove the bed, check the relay and fuse up front on the drivers side inner fender fuse box. I'd double check the ground wire at the rear as well just to make sure it's

...box under the bed, is there something I'm missing??David As all these plug ins will pull considerable power I would be looking for a fusible link near the battery or near the main fuse box. Contact ...

...BOX FOR A 8Ft BED HI THERE, I BOUGHT A 2001 F350 SUPERDUTY CREWCAB 7.3 POWERSTROKE, NON DUALLY, WITH A CONTRACTOR SERVICE BOX ON IT, WHICH I TOOK OFF AND SOLD, NOW PLANING TO BUY A PICKUP BED FOR IT, ...

...bed or the tank may need to come off, but a quicker way may be to leave the old line in and just cut it, reflare the ends, and reroute a new spliced line. Your Firestone mechanics may not have the ...

bed to prevent pulling them out when the truck box is taken off.3Unscrew the hose clamp securing the fuel tank fill-up line to the fill spout on the truck bed. A standard flathead screwdriver will fit

...to access it. Under the glove box. In plain view. Remove the screws and cover will come off. I have a Ford F-250. Same as the Expedition but with a bed. There is no cabin air filter on these

pump in 1988 toyota PU. Drop the tank or raise the Box? I find it easier to raise the bed up just far enough to get it out . i tried to take out tank and half of the bolts were frozen in their threads