1991 GMC C1500 "touched yellow wire frame car" Questions

...Yellow and Dk Green wires. i.e. both sides flash at the same time. Used a DVOM set on ''continuity'' to check wiring harness between firewall and rear connector. There is NO SHORT in the wires. ...

...wire diagram Fan yellow brown blue red black white Okay so the first thing you need to do is fine the ground but you need a multimeter the ground is the black wire and if you touch the part of metal ...

wire with the purple or pink stripe carries +12 in reference to chassis to the backup bulbs in the rear and is probably fused at 10 amps. Make sure you test it with a test light before you cut or hack

...wire, or a damaged connector, or a dead airbag control module. If your car has side bags mounted in the seats, it's possible that it has the same problem that my Audi has - on my car, moving the seat ...

...wire is purple and yellow..Touching the wire to ground shuts the alarm off. Just make sure if its broke that the end going into truck is the one you groung on the frame. Also locking the doors from ...

...power at the plug for the brake lights, Dark Green wire for right, Yellow for Left. where it plugs in, the tail lights circuit boards are a common problem. Make sure the black wire has a good

...yellow marks on it and the other is white with a blue line down it might be a green line need to know what the two wire's that aren't hooked to anything are and other than the radio or amp possibly ...

...yellow/blk wire from the the bl.moter and using a test wire ground the contact the yel/blk wire came from. If the blower works, replace the blower resistor assembly. It's located near the blower mtr. ...

...Yellow...The wire you are interested in is the "Black/Light Blue"...This is a chassis ground wire...There should be Ground straps on the frame...With the meter set on X10 ohms scale... Search under ...

...yellow wire for my Mass Airflow sensor seems to be cut and torn. Can i cut the bad ends off and splice it together with another wire to get it working correctly. I would get a new connector and wire ...