...reset your Passlock system. The other issue is that the BCM harness is known to corrode and will cause the passlock to fail and will lead to a no start. Check the BCM under the glove box, the bcm had ...
Question about Pontiac Grand Am
reset it, any other ideas??? Several GM products, including the Chevrolet Impala and Malibu, the Oldsmobile Alero, the Pontiac Grand Prix, and Saturn Ion, have issues with the Security light coming on
Question about Pontiac Grand Am
...bcm and put new block numbers in to unlock security? No. Do a reset. or relearn. Reset. turn the key on for 10 minutes, off for 30 seconds. Start the car. relearn is three times this. start the car ...
BCM will reset the inadvertent power control relay output when one of the following actions is performed: • Open or close a door. • Turn the ignition switch to the ON position. • Turn off any interior
Question about Pontiac Grand Am
...reset the anti-theft system so the car will start sad but you must get it to a dealer to fix this problem .the key has to have the BCM code flashed to it put the key into ign lock drivers door then ...
...start engine. you can also try disconnecting battery for 30mins and then hold pos and neg cables together with the battery still disconnected for 1sec to reset pcm /bcm. then relearn securty. good ...
Question about Pontiac Grand Am
...cars. Do you mean gas tank ? Does it leak when over half tank ? If so then you may have a leak in the seam of the tank or a hole. Does the car turn over but won't start ? May want to have your bypass ...
...reset by turning to on and waiting 10 minutes. This worked but we are wondering if there is a way to bypass or disable the passlock system to avoid it happening again? Thanks there is a way to bypass ...
...reset. Here's the "fix" I just did for my 99 tahoe. Took the cover off the steering column, unplugged the sensor from the cylinder *while* the car was running. it's a 3 wire plug red w/ white, orange ...
bcm first with no difference, then the ecm wouldn't even start the car. I put both original parts back in and now it still wont start, I tried the security reset trick to wait the 10 min. turn
1,796 questions posted
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,208 Questions