2003 Pontiac Grand Am "change lock unlock switch" Questions

...change door and trunk locks and would use keyless entry need to know how to go about putting it on my car have got everything from other car To program the transmitters, perform the following ...

...unlock the ignition? HAVE IT CHANGED OUT my locksmith specialize on hyundais.... he removed a small plastic broken switch in ignition lock cylinder area... it fixed the KEY WONT TURN problem... he ...

...unlock codes. That's all well and good until you change the battery or every time you disconnect the power from the battery the radio locks. This works on all the older GM, my truck is a 1999, ...

...sad but you must get it to a dealer to fix this problem .the key has to have the BCM code flashed to it put the key into ign lock drivers door then push and hold the unlock button on the

...lock button it doest do anything not even a noice, but when i press the button to unlock the doors it works all the time. what could be the problem, i have an alarm could that be the problem? Help ...

change the part number. Please discard Corporate Bulletin Number 03-08-67-009 (Section 08 -- Body and Accessories) Condition Some customers may comment that the sunroof will not open or will not close

...LOCK SYSTEM Setting change of Automatic Door Locks (UNLOCK) Function The unlock operation setting of the automatic door locks function can be changed. With CONSULT The ON/OFF switching of the ...

...lock switches. The parameters should change between Active and Inactive. ?‡' If the values does not change between the commanded states, refer to Door Lock Switch Malfunction. Command the driver door ...

...lock switches are no good, Change both the switches in your doors and problem solved Had the same problem with locks locking and unlocking without pushing the lock button. The passenger door lock ...

...lock or unlock command ?€¢ Keyless entry lock or unlock command ?€¢ A driver door lock key cylinder switch lock or unlock command ?€¢ Programmed automatic door lock and/or unlock command ?€¢ Lockout ...