95 Sierra gmc z71 won't go in reverse Put in reverse and won't back up could be the reverse planetary gear, which also runs 2nd and 4th gears.
Why did reverse "go out"? All the other gears work just reverse went out. Did not make a sound. Just went to back up and it wouldnt run the fault codes and look for a problem servo/ solenoid for ...
no reverse I go into drive just fine but it won't go into reverse ...When it is in reverse it acts like nutrel check the linkage adjustment try and pull the lever back and hold it between ...
won't drive in reverse, I have adjusted the throttle connection to the set point. It had been shifting erratically,but how would this affect reverse? The only thing the throttle may affect is the ...
Question about GMC Sierra
...day and it wouldnt go into to 2nd gear I go toff next exit put it in park then it wouldnt go into reverse, I checked trans fluid put some in and now I have all My 2000 GMC Jimmy wont go into
91 gmc Sierra 5 speed standard. Had a short in the reverse so had no lights. Fixed the short as well as replaced the reverse switch with the same size switch. Now all works when I engage the switch by
1999 gmc sierra 2500, transmission slipping, no 2nd, 3rd or reverse 1st and 3rd only, no 2,4 or R; sun shell is fractured or splines are sheared off. Transmission must be removed to fix the problem ...
...to mount some back up lights on it, but I don't how to wire them in to work when I put mt truck in reverse. You will need at least a 6way car and trailer connection.Start by clipping the plug ends ...
I HAVE A 5 SPEED MANUAL TRANSMISSION, 5TH GEAR AND REVERSE DON'T WORK. ANY IDEAS? Could be the syncrnizer No Suchros on 5th and reverse, Geeze
no reverse I had a similar problem with my truck(no reverse). It's your transmission. You'll have to rebuilt it. It have costing me 1400 to rebiult it. Good Luck...
682 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions