1996 GMC Sierra "gear" Questions

My 1993 Gmc Sierra 2500 automatic first gear shifts hard also from park to drive others gears are smooth i have overdrive I changed transmission mount oil level ok The gear shift lever indicators tell

how do you assemble spider gears in differential in a 1999 gmc seirra half ton? What is the problem? The side gears can only go one place, they have the axle splines The spider gears get retained by ...

1994 GMC 1/2 ton manual trasmission, 5th gear won't stay in gear, why? This could be due to worn sychros. These are the brass rings which allow the gears to line up when shifting. If these are worn, ...

Put a transmission in a 2000 sierra and it want go in any gear What does "it want go" mean? It will not shift into gear, or once in gear it "want" pull? If the latter, do you fill the trans with fluid

Transmission slipping in 2nd gear 2003 GMC Sierra 5.3 4l60e trans after shifting from 1st to 2nd if you push accelerator engine revs like slipping in 2nd gear. If let off accelerator it will shift 3rd

...the disturbtor shaft can look like the timing is the problem.But if you have broken a tooth on the gear or something you need to remove the radaitor the water pump the timing cover you can unbolt

GEAR SHIFT ONLY GOES INTO 3RD AND 4TH It sounds like maybe the gear box is no longer aligned.. you may need to have someone hold the gear box in neutral as you re-adjust the cables under the car ...

...3500 6.6 duramax had the service 4wd abs light and eBrake light come one also the line showing what gear its in went away shut the truck off went too restart and truck wouldn't start jumped the ...

i lost 5th gear and reverse in my 1998 gmc sierra truck, then drove it 100 miles using 1st 2nd 3rd and 4th gear and came to my first stop to take off again, put it in 1st gear let out clutch and it ...

...WILL NOT FIRE OR START 1998 GMC 1500 if the starter is spinning very fast, that is a clue that the gear on the starter is not engaging with the ring gear on the flywheel. so either the bendix is not ...