1996 GMC Sierra "clutch" Questions

the clutch pedal dropped to the floor....was no smell of burnibg clutch, just lost pressure..no fluid leaking and resevior is full. replaced slave cylinder and line 3 years ago and rebuilt master ...

No clutch The clutch will not engage You need a New clutch. I assume it is to the floor and it still moves? You can try adjusting the clutch but in most cases you'll need a new clutch

clutch slips badly in first gear, Hi, this is a hydraulic clutch system.If the clutch is slipping, it is more than likely a worn clutch.If you had a hydraulic issue, the truck would be hard to shift, ...

how do I adjust play in clutch pedal? Clutch pedal goes almost to floor before engaging clutch. not sure if theses have adjustment on them but if so it will be under the dash on the clutch rod its ...

Clutch pedal goes to floor. I change the clutch, pressure plate and throw out bearing. Still no clutch pedal. Changed out the cylinder that presses against throw out lever arm and bled it. Still no ...

how to remove the a/c clutch from a 1998 gmc sierra 1500 5.7 l I believe this AC compressor is the same as my '95 Astro. The clutch is pressed on to the compressor shaft. You should see a threaded

we have bled the lines on a 1994 gmc sierra and are getting no tension in the clutch what do we do? From your comments, your clutch master is no longer working. Check your clutch master, and replace ...

...do i need a new thermostat or could it be something else? could be thermostat but also could be clutch fan,or a bad head gasket. REPLACE THERMOSTAT.CHECK CLUTCH FAN WHEN ENGINE HOT CLUTCH FAN ...

removal of fan clutch go to your local major parts house and they will usually loan tools free of charge. What you are asking for is a clutch fan wrench set. It will come with directions and when you ...

How do I remove and replace the clutch? Many things are involved in replacing a clutch. If it it 4 WD, you will have to remove the drive shafts, transfer case and the trans. If not, then just the ...