1996 GMC Sierra "change oil" Questions

Ad

Question about GMC Sierra

1 Answer

Change oil light stays on Just had my oil changed yesterday & my "chane oil" light remains on. What should I do? turn key to on position (DO NOT START) press and release gas pedal 3 times. leave key ...

Ad

...change oil filter, do not use a wix filter. when last time changed oil? Do the oil change first. hopefully this is the problem. If not then i'd put a high volume oil pump in it or rebuild with new ...

Ad

...1990 GMC Sierra 1500 (5spd) lifters knocking. Engine lopes, when excelerated. Rpl PVC valve, changed oil, rpl spark plugs,new exhaust line. Oil pressure gauge low.Purchased with quite a bit of ...

how do i change the tranmission fluid on a 1997 gmc sierra 1500 You have to drop the transmission oil pan to change the oil, while you are changing the oil the filter is also replaced too.

...oil change,, tech.after inspecting replied that they could not do oil change due to the oil plug threads possibly being stripped plug will not un screw just keep turning in place! is there anything ...

Question about GMC Sierra

2 Answers

...change my oil Drain old oil, replace filter, fill with new oil.First find out how much oil your car holds, and what viscosity (you'll see on any new bottle of oil, 10w-30, 5w-30, 0w-20, etc.) Then ...

...gmc sierra oil pressure gauge doesnt move ticking noise in lifters goes away after a few Did oil change also changed oil pressure sensor Add some Lucas .5 g will do it oil can be thin on high

...oil change and also changed the oil pressure sensor. Since changing the oil sender made no change, dash gauge may be dead. Hook up cheap mechanical gauge to see what is really going on. Ticking when ...

...change oil light BUT NOW IT SAYS OIL LIFE RESETED EVERYTIME I TURN IT ON, WILL THIS STAY ON AND FOR HOW LONG? I JUST RESETED THE change oil light BUT NOW IT SAYS OIL LIFE RESETED EVERYTIME I TURN IT ...

Question about GMC Sierra

1 Answer

...change oil light on the 2004 Chevy Colorado Pick-up truck ? 1. Turn the ignition to ON do not start.Engine OFF dash board lights ON. 2. Press and release the reset button in the driver information ...

Not finding what you are looking for?
1996 GMC Sierra Logo

682 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 GMC Sierra
1998 GMC Sierra

987 Questions

1997 GMC Sierra
1997 GMC Sierra

847 Questions

2000 GMC Sierra
2000 GMC Sierra

676 Questions

1999 GMC Sierra
1999 GMC Sierra

601 Questions

1994 GMC Sierra
1994 GMC Sierra

604 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...