2002 Dodge Stratus "camshaft timing marks" Questions

...camshaft sprockets, if removed. Install the timing belt, taking care to make sure all timing marks are properly aligned, using the recommended procedure. Use care. DO NOT allow oil or solvents to ...

...camshaft timing marks-2.4L engine Timing belt tensioner-2.4L engine Camshaft sprocket alignment-2.4L engine Timing belt installation-2.4L engine Timing belt tension adjustment-2.4L engine Timing belt ...

...timing without being able to turn crank and cams at the same time to align. Do you remove cams or just turn to align???? remove the #1 sparkplug place a long screwdriver in the sparkplug hole point ...

timing marks so that the exhaust camshaft sprocket is a 1 / 2 notch below the intake camshaft sprocket. Use an Allen wrench on the tensioner. Rotate the tensioner counterclockwise while pushing on the

camshaft replacement and achieved timing marks back ,however, still running into interference with camshaft. Sofar,I have only turned the engine by hand. So I shouldn't have created any damage........

...camshaft sprocket alignment for timing belt installation Install the crankshaft sprocket. Set the crankshaft sprocket to Top Dead Center (TDC) by aligning the notch on the sprocket with the arrow on ...

...camshaft sensor malfunction could it be that timing is off Who replaced the timing belt? The timing could be off cause timing marks were not aligned before new belt installed. Distributor is also ...

what's the setting for a timing belt number to set the timing belt on you need haynes or chilton repair manual to see location for timing belt and camshaft sprocket timing marks.

camshaft timing. if belt is ok and timing marks line up then i strongly suggest removing the bolt from the camshaft that holds the cam gear on. with the bolt and cam gear removed you should be able to

...1996 dodge stratus 4.0 followed the manul aligning the timing marks enigine will mot staart with the timing belt back on before putting the accessory belts back on The camshaft(s) are 180 degrees