1996 Mazda MPV "replacing electric ignition switch 96" Questions

ignition switch....what could cause this? it can be the ignition switch or the neutral safety switch. put the transmission in neutral to see if it will start, if it does then the neutral safety switch

...getting any spark so i replaced bothe ignition coils and still no spark...any suggestions on what to check next? i have found many problems with electrical ignition switch to be the ...

...ignition switch and the starter. What else should I be looking at? The ignition switch may be the culprit as some have a chip that responds only to the right key which usually has a red tag. .if they ...

...ignition switch as the key was a bit sloppy, but problem persists Similar problem on 96 Protege. Engine, speedo, tach die, then will restart. Replaced ground cable on battery, cleaned terminal on ...

...12 volts,and then jumps to the 12 volts,after the delay,then replace the ignition switch.If the voltage is at 12 volts when the key is turned to start the car,and the delay occurs,replace the

ignition switch in the car rotates all the way around but it has always done that it just recently started not working to turn the car off.the key will turn but the car will still be on. what could be

...ignition switch of my 96 continental has to be replaced. does this require removing the steering wheel and air bag? No, it does require opening your steering column though. This usually takes a ...

...ignition switch.I replaced the ingnition switch with a new one.Now when I turn the key the dash lights do not come on and the starter does not engage.Also the electric windows won't operate I ...

How do you replace an ignition switch on a 96 Lincoln Town Car? is this a key switch or the electrical actuator

...ignition switch, or the mechanical linkage connecting it to the lock cylinder. Often there is a small part that can break and cause your switch not to turn. Usually you can remove the electrical ...