1996 Mazda 626 "distributor cap" Questions

Distributor Cap: remove the 3-bolts holding the distriboutr to its body. 2. Inspect the distributor cap for cracks, and the roror-button is not worn or broken. 3. Inspect the distributor-cap terminals

...distributor cap and mark where the rotor is pointing with black marker. then mark the distributor at the adjusting bolt so you can line it back up unplug distributor and remove mounting bolts. when ...

distributor cap and not allowing contacts to be made to the spark plugs. Where all the spark plug wires come together, is the distributor cap, unclip the cap and I am betting you will see water and or

...cap, distributor button, etc. We unbolted the entire distributor assembly and pulled it out from the engine. We now can't get the car to start or run. How do I fix? Does "entire distributor aseembly" ...

cap. Can see spark at distributor, nothing out the wires. Reolaced distributor with used oart, same outcome. Is ignition coil and ignition control module part of the distributor? Hi, common thing with

...is like giving your fuel system a tune-up. possibly, depending on how humid it is near you, corrosion usually builds up on the distributor HV points, this can be solved by replacing the cap and

Intermittant flat spot at 3000 + revs under load. 1982 Mazda 626 Check the distributor ,pull the cap,look in,see if there is oil standing in the bottom of the distributor.

...to start but has no spark. Check fuses, relays, distributor cap rotor, timing belt and all wiring connections seem ok. help? Distributor fault, the coil goes down in tyhem and sometimes pops the

...distributor cap to hook up tester to check spark. Trying to trace my way back to find what is wrong with spark. Trying to check for voltage at ignition coil electrical connector but not sure what ...

...distributor cap no 1 is as i have taken the leads off and dont know which way they go back on here ya go: Firing order is 1-3-4-2 Stod in front of the vehicle, 1 on the distributor cap should be on ...