...about 40 mph. Lost power suddenly. Won't start. Fuel injected and seems ok. Battery good. No spark to plug wires, tested with calibrated ignition tester. 1993 Mazda 626 4 cyl. Has distributor. ...
...compression in that cylinder and compare it to the others. Have you verified that you are getting spark at the plug when the engine turns over? To do this you can remove the spark plug and insert
i have changed ditributor cap spark plugs for my mazda626 92,v36,2.5. after i started its misfiring and i think its not burning the fuel,can see smoke coming from the exhaust.as i try to rev up the ...
...car to start...and it's been like that since. The mechanic said I needed a tune-up,which I put new spark plugs,new wires,and distuber cap..Im thinking it might be the fuel filter? ny suggestions For ...
ford telstar ignition coil f-694 and igniter deliver no spark can start car engine turn no spark to spark plugs fuel pump ok and relay for fuel pump. your distributor modual needs replacing
replaced distributer crank sensor new leads and spark plugs but still no spark Are you getting spark coming out of the coil?
wont start no spark car cut out on freewasy battery light came on .got new battery and fan comes on right away .turns over wont start. no spark check ignition coil it must have been fried thats why it
My Mazda 626 is running rough and has sparks coming from the sides of the spark plug leads also i can hear air coming from the engine bay. Remove you spark plug leads and see if they are soaked with ...
i put new spark plugs in, and the cables are 2 months old. i took out the spark plugs and they are all lack at the tip. in cylinder #3 there is some oil on the spark plug you have to fix your engine,,
started right up. I'm afraid to drive it until it's been fixed. NO CODES are showing. I believe the spark ceases, as I can smell fuel from cranking. Checked distributor cap, looks perfect inside. What
302 questions posted
Usually answered in minutes!
544 Questions
410 Questions
356 Questions
269 Questions
277 Questions