2004 GMC Envoy "remove head 04" Questions

Ad

...head. Once you remove the bolt.... you will have to rotate the actuator back and forth while pulling on the actuator to get it to slide out of the head. sensor Because this solenoid has a unique 90 ...

Ad

Question about GMC Envoy

1 Answer

...04/38l-engine-cylinder-head-removal.html----------------3.8L Engine Removal? http://fordrepairhelp.blogspot.in/2012/04/38l-engine-removal.html------------Pontiac Engine removal? ...

Ad

Question about GMC Envoy

1 Answer

04 beetle head gasket i have a 04 vw beetle that is leaking oil out the exhaust and LH head area, do i have to drop motor? No. Check if it is the head gasket or simply the rocker cover gasket that is ...

Question about GMC Envoy

1 Answer

...bulbs on a 2004 Grand Am? you need gloves hands cant touch bulbs .oils from hand causes bulb to blow.to change bulb you raise hood remove head light housing has to be removed before you remove

04 epica can head gasket be changed without pulling engine ? It sure can. all heads can be pulled with out removing the engine. Removing the engine is extra work. But the heads and other work can be ...

...remove the head but you do have to remove valve cover timing chain cover since you will be removing both cams to access the hydraulic lash adjusters {lifters}the link is not the 2.2 but shows what is ...

Remove the screws holding the coil on the valve cover, gently pull/twist off (stuck like a cork) plugs should be down deep in cylinder head. Modern engines have iridium (100,000 mi) plugs. Yours could

...remove head get it shaved to flatten and replace head gasket with "Felpro" brand. THEN ( extremely important ) TORQUE the head bolts in the proper pattern. Do 1/3 torque increments (i.e. if ultimate ...

Question about GMC Envoy

1 Answer

...head light fuse. ========== To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of ...

Question about GMC Envoy

1 Answer

...and i cant get the terminals loose. what size wrench or socket is needed to remove them? If it has "side" posts then it should be 8mm hex head. If it has "top" post then it should be 7/16 hex

Not finding what you are looking for?
2004 GMC Envoy Logo

3,345 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

2006 GMC Envoy
2006 GMC Envoy

593 Questions

2005 GMC Envoy
2005 GMC Envoy

540 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...