2002 GMC Safari "cause brake lights stay driving" Questions

...brake lights, all of these things can cause what you describe. At speed (2,000 rpm or so), you need to be 14 volts or higher. To test: Fully charge, then load test battery. If Battery okay, then load ...

brake light warning lights on, however, when checked by mechanic the abs brakes are working fine. whats causing light to come on? everything else is running fine at 154,000 miles. FOR ONE THING CHANGE

driving. Also emergency brake does not work. OK, the brake light is caused most likely by the emergency brake cable being broken, and the pedal or brake lever is not in position. Also, the brake light

...driving. my brake pads are all new as is my master cylinder. the fluid is full. what is causing this? There is a switch on the parking brake handle or foot pedal,witch ever it has,this is more than ...

...on. Seems to stop and drive fine. Doesn't feel out of alignment. have brakes checked as when at about 20-25% remaining will cause light to stay on but brakes feel fine and no brake noise will ...

brake lights stay on while driving the brake lights are lite up as if the breaks are on while driving the brake light switch is located at the brake pedal, see if the pedal is operating the switch. ...

...TO KEEP DRIVING.HAVE FIX QUICK AS POSSIBLE.BECAUSE THE ABS BRAKE UNIT IS PART OF YOUR MAIN BRAKING SYSTEM.IF ABS BRAKE UNIT BAD BY BEING PART OF THE MASTERCYLINDER IT CAN CAUSE COMPLETE BRAKE

Also brake pads can be worn down below the minimum causing brake fluid level to drop below the minimum level. In any case - make sure the cause of the warning light is known before driving any further

...cause my brake lights to stay on while driving? I have a 2008 Buick Enclave Broken brake light switch at the pedal. read brake light section of page at link below. Do It Yourself Diagnosis and ...

Brake lights stay on. Sometimes the Brake light will go out but sometimes it will stay on. The SRS and ABS lights are always on. The car seems to be driving okay. brake light could be a sensor wire or