2003 Ford Mustang "removing exhaust manifold" Questions

Ad

STUFF.AND YOUR AC SYSTEM HAS TO BE DISCHARGED THE AC COMPRESSOR HAS TO BE REMOVED. NOW IF YOU HAVE 4.6L DOHC YOU DONT HAVE TO REMOVE ALOT OF PARTS TO GET EXHAUST MANIFOLD OFF. WHICH ENGINE DO YOU HAVE

Ad

Question about Ford Mustang

1 Answer

how can I adjust idle? the other night i noticed that my mustang's idle would rev upto red line over 4500 rpms when i stopped and raised the hood i noticed that my exhaust manifolds were glowing red ...

Ad

Question about Ford Mustang

1 Answer

...exhaust manifold or header. From underneath the car with it jack and secured safely on jack stands and with the wheels blocked, you will find it inboard of the passenger side frame rail and exhaust. ...

Question about Ford Mustang

1 Answer

...exhaust from head assembly. On this engine the head is also the intake manifold - it's cast as a unit. Remove carb and remove heater hoses from carb base plate. Remove head bolts and discard. ...

...exhaust manifold center of block you cant miss them. Tap them gently on the sides to turn them, then pry them off. Do not drop them inside the engine thus they are impossible to remove. I have a 97 ...

Question about Ford Mustang

1 Answer

...manifold .it has two vacuum lines going to the exhaust system ,or pipe. and it will have a gray plug going to it.this sensor is about 1/ 1/2 to 2inches wide and maybe and inch tall and a 1/2 inch ...

Question about Ford Mustang

3 Answers

...removing all seats except for the driver's. get the spare tire outta the trunk and make sure you take a **** before racing. Ok, i would purchase a Hyper tech performance chip. This will give you a 50 ...

...exhaust gasses. close to 800 F. I also before removing it tried JB weld and muffler repair to seal the hole. It was way to hot for them and melted them off or turned them into brittle flakes. you can ...

Question about Ford Mustang

1 Answer

...exhaust recirculation insufficient" I've had the egr valve changed and the solenoid and the light is still coming on with the same code after bring cleared. Any ideas on what could be wrong? ...

...exhaust manifold(s) or exhaust ports when the engine is in open loop and pre-catalytic converter when in closed loop. This reduces hydrocarbon emissions (HC), Carbon Monoxide (CO), and oxides of ...

Not finding what you are looking for?
2003 Ford Mustang Logo

594 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Mustang
1998 Ford Mustang

706 Questions

2000 Ford Mustang
2000 Ford Mustang

694 Questions

2001 Ford Mustang
2001 Ford Mustang

653 Questions

1995 Ford Mustang
1995 Ford Mustang

589 Questions

2002 Ford Mustang
2002 Ford Mustang

617 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...