2000 Ford Mustang "3 v6 idles rough" Questions

...3.8L v6, runs rough especially when warm, doesn't want to idle, low power have to keep rpm's up How long have you had this problem? It could just be a bad tank of gas. Other things to check: 1. fuel ...

...3 v6 1999 2006 2007 2013 Chevrolet Silverado GMC Sierra 1500 Trouble starting and rough low idle no codes My 2002 1500 Sliverado 4 8L... Internal Faults in Distributor Can Cause Engine Problems ...

...3 with V6 Manual transmission. Engine idle revving up and down Shortly after I start my MX-3 when cold the idle goes up and down from 1000 rpm to about 2,500 rpm. Then after running for about 15 ...

...V6 with following fault codes: P0304, P0136, P0156, P0420, P0430, P1131, P1151, P0505. Car was throwing cat con fault. I removed the converter. Idle Air Control valve was also not working properly so ...

...V6 3.0 I think the coil pak is outta whack do to the firing order dont know what the firing order is rough idle in park and in gear but none when driving ran codes says number 2 misfire Cylinders are ...

...3.0l v6 turbo. when warm, starts to saab 95 2002 3.0l v6 turbo. when warm, starts to run rough, hunting etc. little power output sounds as if not on all cylinders. When cold, runs ok again.. Have you ...

...3.3 liter v6 engines, his is an automatic 4wd crew cab and mine is a standard 4 x 2 Desert Runner. About the same time both of our trucks broke down with the same issues running rough, no power, when ...

3-2 is for a v6 My 96 chevy 4.3 litre was running rough. Bad exhaust smell and idle was high. My mechanic changed the fuel pressure regulator and then said it was the #6 injector. He changed that too.

...3. 0 V6. Was running rough, so I replaced the plugs, coils, upper plenum gaskets, and front and rear exhaust manifolds. As I was going through the process of letting the pcm re learn the idle, fuel ...

rough and my check engine light is flashing after 2-3 minutes after running the engine. exhaust pipe smell fuel. what is my next step? please help. was it doing this before you changed them? something