2000 Ford Crown Victoria "intake manifold misfire engine shuts" Questions

...intake manifold gasket. if there is no water replace the coil. good luck bad fuel injector??? Try replacing the spark plug on that cylinder also check spark plug wire, it may need cleaning with a ...

...intake manifold crack,intake manifold gasket?help! HI there:Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly.A P0300 ...

...components for proper condition and check for vacuum leaks around the intake manifold as this can cause this type of code.you may also have injector problems or even fuel pressure or flow ...

not something you can do from home. Another thing would be a possible collapsed PCV tube on the back of the intake manifold. These collapse all the time but usually cause engine shut down upon warm up

...could be that the upper or lower intake manifold gaskets have gone bad. That would cause them to leak air and make the engine run lean, and too fast, until the engine warms up and the gap swells

...intake manifold or vacuum hoses. Perform a Compression Test: Low compression in cylinder 5 could lead to a misfire. Perform a compression test to check the compression levels in all cylinders. ...

...intake manifold due to leakage into my #5 spark plug cinlinder causing rough driving and misfire and also replaced with new spark plugs now the problem is that the car is shaking when sitting at a ...

...misfire. No flickers from the check engine light (yet). Plugs and wires are almost 2 years (35k miles) old, and we have new ones ready to put in. Any additional suggestions for things to check? Some ...

...intake manifold. Considering the absence of spark changing the ignition module is the next step to take look on ebay motors to get the best price on parts, however I would still check with the local ...

...wires or spark plugs, spark plugs probably getting oil on them due to leaking oil leaking by valve cover circular seals around spark plugs or you have a intake manifold leak at cylinder 1 and ...