2000 Ford Crown Victoria "engine codes" Questions

...engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an ...

Check engine light is on. Is it the PO705 vehicle speed sensor A maken it do that? Yup, if you scanned your engine computer and you got a code P0705, you can bet that's why your Check Engine light is ...

engine light comes on because the computer sees a fault with a sensor, device, or system. Your best bet is to pull the codes with a scan tool. Check your local auto parts store. Sometimes they will do

...Engine lights goes on temp when highway driving at about 70 to 75 MPH. It then however goes back off. I pulled the codes stored in continuos memory, and got codes 322,336,and 337 which indicated EGR ...

...engine surges at idle in gear Put a SCAN TOOL on your car.. FORD BLINK Codes are not as accurate as getting the P0417 Code (Just made up the P0417, does not mean anything)... More than Likely you are ...

...Engine light still comes on. any sugesstions? Some auto stores will pull the codes for you as a free service. The codes will tell what the problem is. Check for an auto store in your area that ...

Engine Service light on 1994 F-150 get an EEC-IV code scanner to find codes from the engine light. you can pick one up from any chain autoparts store or offline

AMSOIL IS ASKING FOR MY ENGINE CODE FOR MY 2005 FORD CROWN VICTORIA AS TO WHETHER IT IS: 4.6L 8CYL (9) C OR 4.6L 8CYL (W)?? I HAVE LOOKED ALL THROUGH MY OWNERS MANUAL AND CANNOT FIND THIS CODE. The ...

what does check engine code 18 mean on a 1985 ford crown victoria? 5.0 engine code 18.what does it mean? Code 18 is a spout circuit problem.  You probably need the flow chart to check all of the ...

...codes?? The PCM is programed for the LS engine parameters and now that you have changed engines the signal from the new engine are out of parameters> Either see if you can get the PCM ...