1995 Ford Explorer "car shakes above 60 mph" Questions

shakes at 60 mphexplorer xlt when i reach 60 mph my explorer will start to shake but calms down a little when i reach 70 mph. Tires would be the 1st place to check. If you seem to feel it more in your

...above 60 mph. I got the car on a trade and i fear that the previous owner has damaged something in the all wheel drive system, but hoping it is something not so severe tire rod ends if it gets to bad ...

...shakes (sometimes sevearly). This can be felt through the steering wheel and by passengers. once above about 75mph the shaking almost dissapears. Most likely with this problem is the front tires. The ...

...car goes. If it shakes then it come from a wheel. If it doesn't shake then the problem could come from the engine. Depending where you're living, if you are driving in the snow make sure to clean ...

...shakes when gas is applied at speeds above 60 mph-more on some roads than others, and sometimes when accelerating even at lower speeds I am currently having the same problem and suspect the engine ...

...car jerks whenever I press the gas pedal. When I am driving and let off the gas it runs smooth but as soon as I give it a little gas, it jerks again. There no smooth acceleration. Also, It shakes ...

above. could you please give us some idea of what could be wrong? we bought it used. has new tires and shocks. looks great and no other problem. Hello, it's most likely a bad front wheel bearing or an

...60 to 65 mph, I took it into the mechanic and they had all of the U Joints and the carrier bearing replaced also had the tires balanced and rotated. Now the vibration has turned into a really bad ...

...car shakes after applying brakes at high speeds of 60 to 70 MPH on my 2001 / IS300 lexus. I recently had the rotors turned and put on new break pads before this problem really became noticable. I ...

...car shakes , and shudders. It calms down quite a bit when its in cruise. The shaking and shuddering occurs while accelerating in the 40 to 60 mph zone. I thought it was u joints or wheel bearings , ...